To freckstweety and PC family,
I found a very affordable replacement to the Sanicon pump as described in detail HERE.
Thank you ever so much for the detailed reply. I will double check with PC and see what they say as well and double check to see the what macerator is presently installed. Just want to get the right one. Thanks again.
I checked my Flojet pump as I was de-winterizing the MH and when the pump was on, it leaked from under the pump and not at any of the fittings So I don't know where the problems is as it is coming from under the metal brace that holds the pump. Where and what part is that?Does that mean the pump is bad?
The leak might originate at an attachment point of the pump to something else. Maybe the pump assembly is fine and it is leaking somewhere near it, just finding it's way down to that drip point.
It might be that the 4 bolts that hold the pump assembly together have become loose and they simply need to be tightened. When I bought my replacement pump, those 4 bolts were nearly loose to begin with so I could see how they would loosen up and start leaking. I made them tighter during my new pump conversion process.
It is also possible the pump is leaking in a manner that requires replacement. The question to ask yourself is whether the dripping warrants replacement. My original pump dripped for a number of years before I replaced it. It didn't drip much and it did stop dripping soon after dumping. Since my original pump had a broken bolt which ended up jamming the pump, I do wonder if that bolt had broke long before which may have started the dripping in the first place.
My advise (for what it's worth) is that if it drips only during dumping and for a short while afterward, don't be troubled. Just ignore it. Now if it's a serious stream, that's different. I would have it looked at, either tighten-up or replaced.
