Hi Everyone,
I was wondering if anyone here has ever serviced a waste tank valve electric actuator, opened it up, cleaned it, lubricated it, etc.
Our PC is coming up on it's 10th birthday. This past trip I noticed that our black tank electric actuator opens the valve normal, but strains a bit to close it. We have never pooped in the black tank but it does get toilet paper from my wife, so the valve itself should not be difficult to open and close.
My end-of-season PC prep-for-storage in our garage under our bedroom, one of the things I do is bleach both waste tanks to eliminate sewer gas. I add about a quart of bleach to each tank and then fill them to their tippy-top capacity with water, then soak them for about an hour, then drain & refill with fresh water and soak a while, drain & refill again, then the final drain to remove any remaining bleach residue that I hear could damage the valves. I don't believe my process is cause for the sluggish actuator, but I wanted to share my practice, just in-case you wonder about that.
Ron