I went to the factory last week and spent a number of hours over two days poking and prodding. I enjoyed my time there. Since I had never been in a PC, I first had to decide between a 2351 and a 2552 and 4 X 4 or not. Earl, as others have mentioned, gave me a nice tour and then allowed me to wander through units myself and talk to employees. In the end, I decided against the 4 X 4 but I did order a 2351 with the following major options:
Built on 450 chassis
Elongated kitchen (giving up pantry)
Slide out with dinette
Full body paint (Desert Sand exterior and Toast interior)
Cherry cabinets and floors
Premium package
Leveling jacks
Insulated windows
Back up monitor
150 W solar panel
15,000 BTU A/C
Plus a whole lot of other “given” common options (Euro chair, awning, bedspread, etc.) and other not so common options.
In an earlier thread, I asked a question about the adequacy of the exterior patio light. I am not sure I will need them, but I replaced the patio light with a larger LED light (on / off / motion positions) and the same light on the back, just under the upper brake light.
One thing I wasn’t real happy with was the plastic toilet which seems pretty short (front to back). According to Earl, that is the only toilet that will fit in the overall rather tight bathroom. Does anyone with a rear corner bath have any options or solutions?
Thanks
