Hello Guest!

Water heater

  • 1 Replies
  • 18 Views
*

RKS

  • ****
  • 85
    • View Profile
  • OwnPC: Yes
  • NewUsed: New
  • PurchDate: 1/2016
  • Model: 2552
  • ModelYear: 2016
  • Slide: Yes
  • Location: Maine
Water heater
« on: August 26, 2026, 02:48:10 pm »
Currently at Acadia  National Park, Schoodic unit.  Water heater has sprung a leak, all fittings sound and appears to be originating on the bottom. Wondering if any one has replaced theirs and if so with what brand  and how the installation went. Suburban sells a unit that supposedly is direct replacement for the now defunct Atwood brand.  Any thoughts are appreciated.
Bob and Michele
Previously owned a 2350 Sprinter

*

Ron Dittmer

  • *******
  • 5712
  • Ron and Irene
    • View Profile
    • My 2007 2350 Phoenix Cruiser
  • OwnPC: Yes
  • NewUsed: New
  • PurchDate: June 2007
  • Model: 2350 Ford
  • ModelYear: 2007
  • Slide: No
  • IntColor: Cherry Green&Gray
  • ExtColor: Full Body Gray
  • Location: N/E Illinois
Re: Water heater
« Reply #1 on: August 26, 2026, 05:48:52 pm »
I never had my 2007 HWT out, but I have serviced it.  One place of potential leakage/failure is the electric heating element.  It has plastic that just might have cracked.  If you are able to access yours like I am, it is at a low point close to the floor and faces towards the inside of the motorhome.  I had to remove the access panel to get to it.  If you decide to change it, first place as many towels as you can stuff because even with the HWT empty, 1/2 gallon of water still comes out, I assume to assure the element stays submerged even with an empty tank for protection from accidental turn-on during plug-in storage.

The electric heating element resembles this.  Maybe it cracked and is leaking.  As I recall, a new heating element was very affordable.
« Last Edit: August 26, 2026, 05:54:51 pm by Ron Dittmer »
Ron (& Irene) Dittmer