Hello Guest!

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - DKCruzser

Pages: [1] 2 3 ... 6
General Discussion / 2024 Phoenix Cruiser Travel Club Reunion - Las Vegas
« on: February 17, 2024, 02:01:10 pm »
SAVE THE DATE:   2024 Phoenix Cruiser Travel Club Reunion – Oasis RV Resort Las Vegas—29 September – 4 October-- Interest has been high for our coming reunion.   We have reserved 50 sites plus an additional 20 if needed.  However, we must release these last 20 by the end of June if we do not fill them, so do not wait too long to make your reservation.
Online registration started on February 15 at 12 noon EST, 11am CST, 10am, MST, and 9am PST in the members-only section of our website. The Phoenix Cruiser Travel Club – The official club for owners of Phoenix Cruiser RVs.
Registration is $545 for a single person, $690 per couple, and $145 per extra person in the rig. This includes 5 nights of camping, 3 breakfasts, 3 evening meals, BINGO & popcorn, and a ice cream social with on-site Vegas show. We are working with several vendors to make presentations. All sites offer 30 & 50-amp hookups.
An optional side trip is offered on Tuesday, October1st to Hoover Dam by bus. This is the highest concrete arch-gravity dam in the U.S. and produces Lake Mead, the largest reservoir in America. You will go deep inside the dam for a Power Plant Tour to see the inner workings of the massive hydroelectric facilities. There are bonus bus stops at the Arizona Lookout and the Hoover Dam Visitor Center. The cost is $85 per person including a continental breakfast (served on the bus). The bus begins loading at 7:30am, will return about 1PM.
If you wish to add days to come in early or stay longer, contact Elena at the concierge desk at:702-260-2001. She will also be available during the event to help with finding tickets for events and has plenty of suggestions for investigating Vegas and the surrounding area. You might even consider calling her ahead of time for that information.

General Discussion / Re: Quartzsite 2024
« on: January 19, 2024, 10:45:55 am »
Just sent you an email.  The mini rally is still a go.  We may have up to 18+ PC rigs attending.  Here are the coordinates where we will meet:



General Discussion / SRS Airbag Light
« on: October 31, 2023, 06:01:35 pm »
Thanks Don,

What is interesting is the on the passenger side there is only one set of wires going to the pre-tensionsioner.   There are no wires under the passenger seat connected for the seat belt indicator.  There is a set off wires not connected to anything with tape on the end under the passenger seat.

But unlike the driver side with a connector that allows for 4 wires the passenger side only has a connector for 2 wires. 
Only the driver's side has both the SRS and the seatbelt wiring.   For example when my wife sits in the passenger seat without her seatbelt on the indicator doesn't light on indicating she is not wearing the seatbelt.    I thought this didn't seem right, so I checked someone else's rig at the reunion and their passenger seatbelt is also not connected to the indicator.  Let me know if your rig (passenger side) if your seatbelt is connected to the sensor. 

I most likely will end up going to Ford but after checking my OBD indicating the pretensioner error I thought I would ask our fellow PC owners for their input.   

For others that read this post:  Does your passenger seatbelt connected to an indicator on the dash?  So if someone is sitting in the passenger seat without their seatbelt (and the engine on and the driver has their seatbel on) is there a signal on the dash indicating no seatbelt?   

thanks  dave

General Discussion / SRS Airbag Light
« on: October 30, 2023, 05:41:04 pm »
I noticed traveling to Elkhart, for the reunion, my SRS airbag light was on.   After we returned home, I did a diagnostic test with my OBD that indicated a code (b121 3:1_8B) which is a seat belt buckle pretensioner deployment control error on the passenger side.  I took out the passenger seat and examined the wiring and the SRS connector.  All seemed intact (I was thinking my wife had somehow damaged or kinked the wiring or displaced the connector putting something under the seat.  I also checked the ohm reading at the connector that indicated 0.2 ohms compared to the driver side which was 2.5 ohms.   Before I purchase a replacement pretensioner I wanted any feedback if I am on the right track of fixing the problem.  The most common issue about a SRS airbag light is a kink in the wire or loose connector.  I also found a few sources about having to replace the pretensioner.   Your expertise is appreciated.

General Discussion / Signal Light on side mirror
« on: July 10, 2023, 12:10:19 pm »
While traveling on I-80 in Wyoming we hit a pothole and the amber signal light fell out of the side mirror.  Does this light "clip in"?  I don't see a mechanism on how it stays in place.  Any ideas on replacing it or fixing the light to stay in place?  thanks


General Discussion / Re: Medicine cabinet
« on: June 02, 2023, 04:08:15 pm »
We did something similar, but I made the modification to the medicine cabinet out of wood.  I assume you have a 3 D-printer?

General Discussion / Re: Micro-air easy touch RV thermostat
« on: May 22, 2023, 05:39:05 pm »
Just curious if anyone has replaced their thermostat with the Micro-air.   If they have replaced their old thermostat why? 

General Discussion / Micro-air easy touch RV thermostat
« on: May 20, 2023, 09:38:27 am »
Just curious to see if anyone has replaced their RV thermostat with the Micro-air easy touch.    While we haven't had any issues with our Dometic thermostat this thermostat is a digital, color screen, Wi-Fi and Bluetooth.   

2017 2910-D

General Discussion / Re: Lithium batteries and starting the generator
« on: April 04, 2023, 09:50:03 am »
Two - 100 amp/hour Battleborn Lithium batteries.  We have had no issues staring our generator.   

General Discussion / Re: Inverter "Remote" Madness
« on: April 03, 2023, 11:43:35 am »
I just changed my Xantrex 1800 pro to the true sine wave Xantrex 2000.  In our 2910D the inverter is located under the refrigerator area.  My understanding in other models the inverter is located under one of the beds?   It does sound like you are talking about the converter.   The inverter has just a few connections.  The hot coming from the cut off switch from the battery, the negative going to the batteries, one romex cable from the electrical panel to the inverter, one romex back into the panel, and the "phone wire" going to the display panel. 

Tips and Tricks / Re: Leveling System--HWH Factory Service
« on: March 24, 2023, 09:08:28 pm »
Yes, on occasion.my levelers will spring back up.  This occurs when I use the manual option and don't place enough weight on the levelers.   When I use the manual option I know to put the levelers slightly more down so there is more weight on them.   I do at times use the auto option but have learned at times I can do a better job leveling depending upon the terrain. 

General Discussion / Re: Catalytic Converter Theft Protection
« on: March 14, 2023, 10:49:17 am »
I did install a Fast Guard Alarm underneath our 2910D.   The only issue is remembering to activate the alarm via the remote.  I attached the unit using the zip ties and not directly onto the exhaust pipe.   I installed the unit off the chassis near the catalytic converter. 


General Discussion / Re: Black and gray tank sensors
« on: March 11, 2023, 01:16:33 pm »
Has anyone installed the See Level system themselves rather than having the PC factory replace the existing tank monitor system?  If you have please provide details on how you installed and connected the wiring.   Thanks

General Discussion / Re: replacing an absorption refrigerator with 12-volt
« on: September 25, 2022, 10:56:04 am »
My understanding is the 3 way refrigerator does use more energy from your batteries when on DC as compared to the new 12 volt variable speed.  After reviewing several online posts, the energy draw, when first turning on the Dometic 4104 may draw up to 8 amps but once the temperature is reached will drop down to ~1amp.  The Dometic manual states that the system must be able to handle 15-20 amps when first turning the refrigerator on.  At this point I am not ready to switch out by Norcold absorption refrigerator until I get a better handle on power consumption and gather more data from those that have switched to a 12 volt variable speed compressor refrigerator.  https://www.youtube.com/watch?v=jBB-QUwKmW4


General Discussion / Re: replacing an absorption refrigerator with 12-volt
« on: September 07, 2022, 02:41:52 pm »
There are a several reasons we have considered switching to a 12-volt variable speed compressor rather than an absorption refrigerator.  You are correct in that the 3-way absorption refrigerator does use some 12 -volt while using the propane function.  The newer 12-volt variable speed compressors use about 5 amps until they reach the desired temperature than drops down to about 1/2 -1 amp to maintain the temperature.  The biggest advantages for switching:  1) you can drive with the refrigerator on rather than the absorption where you should turn off the propane when driving 2) the compressor refrigerators cool down much faster only taking a few hours, 3) you don't have to be level for the refrigerator to continue to work efficiently, 4) you don't have to worry about the sun hitting the side where the absorption refrigerator is located.  Here is the best YouTube video I have found that compares absorption, compressor, and residential refrigerator: https://www.youtube.com/watch?v=RwHU_NY0Auo&t=124s

In prior posts, a few PC owners had the company install compressor refrigerators but that was a few years ago.  The variable speed compressors appear very efficient, provide more refrigerator space, and should easily fit into the same location as the factory installed Norcold absorption refrigerator.


Pages: [1] 2 3 ... 6