Login

1

General Discussion / Re: Vroom Install Question

« on: September 05, 2024, 02:09:19 pm »

Gary,
Thanks for the reply. We are working with Tech RV in Maurice, La for the Vroom install. They are about 660 miles from us.

I contacted Keith at the factory and he had the numbers readily available for all three slides.

2

General Discussion / Re: Vroom Install Question

« on: August 16, 2024, 09:55:19 pm »

Ron, thanks for the feedback.

I wonder if anyone else has any different experience.

Kevin

3

General Discussion / Vroom Install Question

« on: August 16, 2024, 01:21:47 am »

I am looking to get the Vroom system installed on all 3 slides in my 2019 2910T. I am talking to the installer in Louisiana, Tech RV.  Dwyane at Tech RV is asking for a picture of a sticker on the schwintek slide h frame on the inside of the coach. It apparently provides them with the dimensions of the original schwintek slide mechanism and is needed for all installs.

I don't see this sticker on any of my slides. For those of you who have had the Vroom system installed, where did you find this sticker on your coach?

Regards, Kevin

4

General Discussion / Re: Vroom Slide System

« on: August 13, 2024, 04:31:05 pm »

I am looking to get the Vroom system installed on all 3 slides in my 2019 2910T. I am talking to the installer in Louisiana, Tech RV.  Dwyane is asking for a picture of a sticker on the schwintek slide h frame on the inside of the coach. It apparently provides them with the dimensions of the original schwintek slide mechanism and is needed for all installs.

I don't see this sticker on any of my slides. For those of you who have had the Vroom system installed, where did you find this sticker on your coach?

Regards, Kevin

5

General Discussion / Re: Giving it up

« on: May 14, 2024, 10:06:26 am »

Chuck,

We very much enjoyed the time spent with you and Sheila in Tennessee and Elkhart and will miss that opportunity in the future.

Good luck on your future adventures.

Kevin and Carol

6

General Discussion / Re: Sanicon Hose Sleeve?

« on: July 05, 2023, 02:16:29 pm »

I sleeved my Sanicon hose when I first got my unit.  Seemed relatively inexpensive and I don't have to worry about dragging the hose on concrete/asphalt and wearing holes in the thin plastic. It's worked fine for over 2 years now.

This is what I used: https://www.amazon.com/gp/product/B016ZZU95Y/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Kevin

7

General Discussion / Re: TPMS

« on: July 05, 2023, 02:06:07 pm »

I have the TST 507 and my experience with it tracks almost exactly with Mike's feedback above.  I did install the provided extender.

I am on my 2nd TST unit in the 10 or so years I have been using it. My first unit was on a pusher for 8 years and I moved that unit to my 2910T for about a year.  I ended up replacing my original unit with another TST unit since they updated the base unit (color monitor) and the sensors (different batteries) during those 9 years. I replaced 2 sensors during the 9 years with the original unit.

I initially had a leakage problem with an extender on my pusher. Turned out to be a burr on the end of the extender. Otherwise I haven't had an issue with extenders. I did replace all of the extenders on my Phoenix with Dually Valve valve stems to eliminate leakage possibilities and make it much easier to add air.

Kevin

 

8

General Discussion / Re: Onan gen fuel pump

« on: June 10, 2023, 01:36:08 pm »

Sounds like a much needed fix.  Any pictures by chance?

Kevin

9

Tips and Tricks / Re: Norcold Fridge improvements

« on: February 16, 2023, 10:27:17 pm »

Great info! Thanks for all the hard work documenting these improvements!

Kevin

10

General Discussion / Re: Broken entry door lock

« on: February 05, 2023, 04:14:40 pm »

Chuck,

Have you looked at this?  It may or may not work for you.

I carry one around with me to fix the inevitable failure of the original latch.

https://www.latchfix.com

Kevin

11

General Discussion / Re: Rear View Camera Poor Picture at Night

« on: July 04, 2022, 05:10:20 pm »

There was no desiccant bag in mine.  Maybe it had been apart before??

The desiccant bag would have been a good idea. Wish I had thought of that before it was sealed up and reinstalled. 

12

General Discussion / Re: FlexArmor Roof Coating

« on: July 04, 2022, 02:46:56 pm »

Hi Lance,

Any idea how much weight the Armor Flex adds to the coach.

As you know, I have to count every pound.

Kevin

13

General Discussion / Re: Rear View Camera Poor Picture at Night

« on: July 04, 2022, 02:43:07 pm »

Hi Lance,

For some reason that rain we had at Mountain Glen RV park got in my camera. Check out the picture. It was dry before that.

Took it apart and let it set for several days inside in the house in the AC to dry out. Reassembled and put sealer around the outside gasket line and edge of glass. Hopefully it will stay sealed.

Kevin

14

General Discussion / Re: @%diamond shield

« on: June 14, 2022, 05:13:45 pm »

I ran across this guy several years ago at the Tampa RV show.  I don't know if he is still in business or not. He was selling his removal service as well as a DIY kit of the stripping solution he uses.

Kevin

https://www.youtube.com/watch?v=d5achUfglWs

15

General Discussion / Re: Front Door Strut

« on: June 08, 2022, 02:27:32 pm »

Hi Lance,

As I recall, I chased the original part number and came up with the force. I changed mine out because it was too long, allowing the door to swing into my awning hardware and scratch the door when the awning was extending. Seems like austinhardware.com did not have a 14 inch/25 lb model available so I found one on Amazon. The 25 lb version works well.

Regards, Kevin