Cruisers Forum
Main Forum => General Discussion => Topic started by: dawndmd on April 13, 2025, 01:07:02 pm
-
Hi all. We just purchased our 2350 2013 Phoenix Cruiser. So excited. She is a great in between from our past truck camper and our Jayco 28 foot, soon to be sold. I would love some ideas on how any of you have installed towel racks, preferably on the bathroom door. Thanks for any info. tymote
-
My wife rolls and stores our big puffy bath towels on this mounted above the toilet. They wedge in tightly to stay in place. We drape wet towels over the shower door. When dry, they go back here. Unfortunately I don't have a proper illustrating picture.
(https://live.staticflickr.com/3359/3497031104_b3afaa4bbb_z.jpg)
We hang our washcloths on the gold hooks. Tooth brushes hang, and tooth paste & other items go in the tray.
(https://live.staticflickr.com/832/28176404178_28945769ef_z.jpg)
Our kitchen towel rack applies to many other PC models.
(https://live.staticflickr.com/1886/30880524648_466fef6bd3_z.jpg)
(https://live.staticflickr.com/1876/42941311050_868d97c0f3_z.jpg)
(https://live.staticflickr.com/1895/44702072732_5f9bdff801_z.jpg)
(https://live.staticflickr.com/1888/42941307980_c8b9dc062e_z.jpg)
(https://live.staticflickr.com/1879/43842058835_33755be6af_z.jpg)
-
Welcome, and congratulations!
We use a metal 3 bar over the door hanger type with only 2 bars installed so it protrudes less. If the entry is too tight of a squeeze you could remove the mirror and hang it on the bedroom side instead.
-
Thank you. Great ideas. I appreciate the photos too. That helps me with the visual.
-
After the mirror on the back of the door fell off and smashed, we decided to screw on 2 towel bars to the back of the door instead. One high, and one about door knob height.
Works very well, creates way more space for drying towels, which you found out is scarce in the bathroom.
-
I suspect incidents of the mirror falling from the mounting clips is more common than owners are willing to admit on the Forum. Upon taking possession of our used Cruiser, i noticed the mirror being loose in the brackets. Tightening the mounting screws had caused the bearing surfaces to erode. The screw holes were " wallowed"
I replaced the original screws with longer versions and monitor their grip. If necessary, I'll use a bigger diameter