Cruisers Forum

Main Forum => General Discussion => Topic started by: Rick John on April 23, 2023, 10:35:45 pm

Title: Remove valance over day/night shades
Post by: Rick John on April 23, 2023, 10:35:45 pm

Have a 2010 2551, with fraying strings in the day/night shades over the side beds.
I understand there is some trick to removing the valance which covers the top of the shade??

Title: Re: Remove valance over day/night shades
Post by: LRUCH on April 24, 2023, 01:14:44 am

The blinds are clipped into 2 metal brackets. Raise the night and day blinds, then slightly press up the front side of the top rail. The back edge will come out of the clip. Disconnect the strings last. They help hold the shades up while you are getting the blind off the bracket.


Once the blinds are out, you'll see (S2 square bit) screws up inside the top of the valance. They are screwed into the cabinet above.

Title: Re: Remove valance over day/night shades
Post by: Rick John on April 25, 2023, 01:53:47 pm

AHA !!!  So there is no need to remove the valance at all, to replace the cords !!
Good to know !!

Thank you !!