Cruisers Forum

Main Forum => General Discussion => Topic started by: JSanford on April 20, 2021, 06:53:51 am

Title: Lagun Table
Post by: JSanford on April 20, 2021, 06:53:51 am

I want to purchase a Lagun table and install it on the left hand slide (left hand sofa chair) of my 2552.  Has anyone done this?  If so, any tips on installation would be appreciated.

Thanks.

Title: Re: Lagun Table
Post by: Volkemon on April 20, 2021, 08:20:19 am

Click on the search icon on the upper right -
(https://www.pngfind.com/pngs/m/104-1043692_search-icon-transparent-white-search-icon-apple-png.png)

and put 'Lagun Table'  in the search field.  Some good info. :)

Title: Re: Lagun Table
Post by: mikeh on April 20, 2021, 08:42:08 am

What Volkemon said.  There has been discussion of Lagun installation issue (with some photos of the Phoenix factory installation).

Mike

Title: Re: Lagun Table
Post by: JSanford on April 20, 2021, 08:46:15 am

Thank you.  I'm working with PC to get one ordered.  Pictures are a bit hard to visualize.  I want to mount on ride side of slide (looking at it).  Left side, sitting in it.

Title: Re: Lagun Table
Post by: RonJ on April 21, 2021, 07:53:02 pm

We have a 2552 also.  We have two lagun tables installed by the factory.  I'll probably remove the one on the right (sitting in the couch) since it blocks the lowest door in the pantry.  They're good sized, so one should be good enough.

Title: Re: Lagun Table
Post by: JSanford on April 21, 2021, 08:46:21 pm

Thanks for the comment, Ron.  I thought maybe two might be a bit much.  I'm concerned how the left one (sitting in the recliner) is mounted.  Any chance you could take a picture of the lower mount.  If not, no problem.  Thanks.

Jim

Title: Re: Lagun Table
Post by: RonJ on April 21, 2021, 09:35:33 pm

Photos

Title: Re: Lagun Table
Post by: RonJ on April 21, 2021, 09:37:11 pm

Photos 1 & 2 are on the left side.
Photo 3 is the right side with the table removed.

Title: Re: Lagun Table
Post by: CalCruiser on April 22, 2021, 12:00:26 am

Quote from: RonJ on April 21, 2021, 09:37:11 pm

Photos 1 & 2 are on the left side.
Photo 3 is the right side with the table removed.

Do the screws for the left side table mount go through the metal slide room frame  underneath the wood trim too?  If so,  did they use short self-tapping screws ,or machine screws with thin welded on nuts to prevent interference with the seal when the slide is extended?  TIA

Title: Re: Lagun Table
Post by: JSanford on April 22, 2021, 06:46:33 am

Thank you so much for the pics.  As it has been said, "a picture is worth a thousand words".  I can also see how the mount could interfere with the pantry on the pantry side.  So, I am waiting on information from PC so I can order one.  Now I can visualize how it was mounted.  Thanks again.
Jim

Title: Re: Lagun Table
Post by: RonJ on April 22, 2021, 12:14:44 pm

Your welcome for the photos.

Calcruiser:
The screws can not be seen on the other side. It appears the screws only go through the wood.

Title: Re: Lagun Table
Post by: JSanford on April 22, 2021, 04:58:25 pm

Placed my order with PC today.  Now it's a waiting game and I'm not good at it.  LOL