Cruisers Forum

Main Forum => General Discussion => Topic started by: Tarnold on December 18, 2019, 05:41:23 pm

Title: Tv mounting
Post by: Tarnold on December 18, 2019, 05:41:23 pm

Last one today. I feel I’m pretty mechanical, but for the life of me I cannot see how the 32” Samsung is mounted.  No idea how all the various wiring is connected on the back.  This unit came with a winegard mission sat antenna.  But no receiver.  I use direct and it was set for dish.  Will have to get on the roof and reset some dip switches when it ever warms back up.  Anybody used a swivel swing mount for one of these?

Title: Re: Tv mounting
Post by: donc13 on December 18, 2019, 05:48:59 pm

Inside the 2 front cabinets, right up by the TV, towards the bottom, there are 2 or 3 screws on each side.  Remove these screws and then you can pull the TV and it's mount out.

Obviously, have someone hold the TV in place while you remove the screws.

Title: Re: Tv mounting
Post by: Tarnold on December 18, 2019, 08:46:16 pm

Ok, see them now. I did look before but didn’t stick my head in far enough. Thanks.

Title: Re: Tv mounting
Post by: Sarz272000 on December 19, 2019, 08:43:03 am

Barry-Sue did a great mod for a TV swivel.

https://forum.phoenixusarv.com/index.php?topic=713.msg4850#msg4850

Ron S