Cruisers Forum
Main Forum => Tips and Tricks => Topic started by: dickreid1 on September 01, 2013, 09:26:46 pm
-
There is a need for a convenient 12 volt outlet.
To satisfy this need the obvious place was by the 120 volt outlet on the side of the flip-out table.
(http://farm4.staticflickr.com/3819/9651305590_6c9a9d4e6f_o.jpg) (http://farm4.staticflickr.com/3833/9648071625_811055a80f_o.jpg)
The table top is easily removed to allow drilling through the table wall and coach floor immediately below. Wiring is routed directly from the coach batteries, through the adjacent storage compartment and up to the 12V connector.
-
Be sure to use a fuse in the circuit. I put it right at the battery.