Cruisers Forum
Main Forum => Tips and Tricks => Topic started by: BarbRN on June 19, 2013, 10:15:18 am
-
Anybody upgrade to elongated china commode in the 2551? Trying to find one that fits allowing the closet door to swing over it. Do we need low profile? Does the footprint work in either Thetford or Dometic styles?
-
Barb
See if this chart from Thetford helps you out. I'm not sure what model is in the 2010 2551.
www.thetford.com/Portals/0/PDFs/toiletChartREV.pdf
Sue
-
Barb
See if this chart from Thetford helps you out. I'm not sure what model is in the 2010 2551.
www.thetford.com/Portals/0/PDFs/toiletChartREV.pdf
Sue
Sue, I had that but it's close and just wanted to verify if anybody tried it yet. Sure appreciate your help.
-
OK update: We got a china, elongated Dometic/Sealand model 320 that fits fine. Ten minute installation. The closet door clears fine if the lid is up, NOT the seat needed to be left up roflol roflol
-
I'm planning replacing mind later this summer different model,, I'm getting a high profile with step flush,,,10minutes wow,,,,any problems,,any tips or just easy, good instructions?? Just curious
David Sparks
2008 PC 2350
Houston
-
I'm planning replacing mind later this summer different model,, I'm getting a high profile with step flush,,,10minutes wow,,,,any problems,,any tips or just easy, good instructions?? Just curious
David Sparks
2008 PC 2350
Houston
Only issue was that an L bracket would have been nice for the water connection. Our plumber consult said just bend the fitting a bit and it will be fine as long as the flow is adequate and it is. What an upgrade this model is! Has a foot pedal too.